Aparat pentru testarea caracteristicii de spalare cu apa

A grease sample is packed in a ball bearing and subjected to a steady water stream under controlled test conditions. The percentage of grease washed out in a one hour period is determined by weight.


Producător: Koehler

Model: K19290

Cod: K19290

Preţ, fără TVA: La cerere


Telefon: 0744.594.794 / 0251.417.664


Conforms to ASTM D1264, D4950 and related specifications

Rotates a lubricated ASTM ball bearing at 600rpm in a modified bearing/housing assembly while impinging the bearing with a jet of water at the specified flow rate and temperature.

The tared bearing and bearing shields are weighed before installation in the bearing housing and again after testing and drying to determine the amount of sample loss.

Consists of reservoir, bearing housing, circulation system and drive motor.

Reservoir is equipped with cartridge heater, thermoregulator and thermometer port for accurate temperature control at 100°F and 175°F (38°C and 79°C) per ASTM specifications.

Circulation system includes constant velocity carbon bearing gear pump, valves and flowmeter directing a controlled water flow to a capillary (1mm) spray nozzle aimed at the bearing housing.

Rugged 1⁄3hp drive motor rotates test bearing at 600rpm while driving the circulation pump.

A two-pulley system permits independent pump operation to circulate water while heating it to test temperature.

Mounted on a finished steel base with locating feet for permanent benchtop placement.

Included Accessories : Ball Bearing (2), Drive Train Guard, Acrylic Reservoir , over, Outer Bearing Shield, Inner Bearing Shield, Test Bearing



Conforms to the specifications of:

ASTM D1264, D4950; IP 215; FTM 791-3252

temperature control

at 100°F and 175°F (38°C and 79°C)

Drive Motor:

1⁄3hp 1725rpm

Temperature Control:

±1°F (±0.5°C) sensitivity

Electrical Requirements

220-240V 50Hz, Single Phase, 5.1A


lxwxh,in.(cm): 18x12x183⁄4 (46x3Ox48)

Net Weight: 

65 lbs (29.5 kg)

Test Bearing


Outer Bearing Shield


Inner Bearing Shield


ASTM 15F Thermometer, Range: 30 to 180°F


ASTM 15C Thermometer, Range: –2 to +80°C


ASTM D1264, D4950; IP 215; FTM 791-3252

CAPTCHA ImageRefresh Image

Imaginile prezentate au caracter informativ şi uneori pot conţine unele inadvertenţe.