Categorii

Unitatea de laborator de ardere

Despite the development of renewable sources and the importance given to use of such clean energies, almost half of the electricity and

energy generated comes from hydrocarbon combustion.

Nowadays, these fuels have two problems. On one hand, they are finite resources. Their exhaustion is predicted to happen in a closer or

further term, according to different published studies. On the other hand, the burning of these fuels release to the atmosphere big quantities

of CO2, which has been accused of being the main cause of global heating.

For these reasons, a sound knowledge of the factors that affect the efficiency of these fuels combustion is essential for everyone involved

in the study and use of energies.

The “TVCC” unit enables the students the study and understanding of many aspects related to combustion, using a small scale unit based

on an industrial dual burner.


Producător: Edibon

Model: TVCC

Cod: 92f5e3a3615f

Preţ, fără TVA: La cerere

Distribuie

Telefon: 0744.594.794 / 0251.417.664

E-mail: tehnic@aparatura-laboratoare.ro

Advanced Real-Time SCADA.

Open Control + Multicontrol + Real-Time Control.

Specialized EDIBON Control Software based on LabVIEW.

National Instruments Data Acquisition board (250 KS/s, kilo samples per second).

Calibration exercises, which are included, teach the user how to calibrate a

sensor and the importance of checking the accuracy of the sensors before taking

measurements.

Projector and/or electronic whiteboard compatibility allows the unit to be

explained and demonstrated to an entire class at one time.

Capable of doing applied research, real industrial simulation, training courses, etc.

Remote operation and control by the user and remote control for EDIBON technical

support, are always included.

Totally safe, utilizing 4 safety systems (Mechanical, Electrical, Electronic & Software).

Designed and manufactured under several quality standards.

Optional ICAI software to create, edit and carry out practical exercises, tests,

exams, calculations, etc. Apart from monitoring user's knowledge and progress reached.

This unit has been designed for future expansion and integration. A common expansion is the EDIBON Scada-Net (ESN) System which enables multiple students to simultaneously operate many units in a network.

Anodized aluminum frame and panels made of painted steel.

The unit includes wheels to facilitate its mobility.

Main metallic elements made of stainless steel.

Diagram in the front panel with distribution of the elements similar to the real one.

Stainless steel combustion chamber (700 mm x 1100 mm) with five pieces of 100 mm diameter for the observation points.

Cooling jacket with thermometer, manometer and pressure switch to avoid overpressure in the jacket.

Dual burner of 150 kW to work both with natural gas (or other LPG) and fuel oil.

Fan integrated in the burner with a regulating lever for the air flow.

The natural gas line includes:

 Manual valve.

 Gas filter.

 Pressure sensor, range: 0 - 1 bar.

 Pressure regulator, range: 0 - 3 bar.

 Manometer, range: 0 - 400 mbar.

 Electronic solenoid valve and safety pressure switch.

 Flow sensor, range: 3 - 21 m³/h.

 Needle valve to regulate the gas inlet flow.

The fuel oil line includes:

 Manual valve.

 Electronic solenoid valve.

 Flow sensor, range: 4 - 38 kg/h.

 Needle valve to regulate the liquid fuel inlet flow.

 Two Storage and supply tanks for the fuel oil.

 Suction pump of the fuel into the burner.

Air ventilation, safety and drain valves.

Five temperature sensors: combustion chamber, cooling water inlet and outlet, combustion fumes outlet and air inlet to the burner.

Four Flow sensors: natural gas inlet, fuel oil inlet, cooling water flow inlet (range: 1.5 - 30 min) and air inlet (by means of a differential pressure sensor, range: 0 - 1 PSI).

Combustion gases analyzer: measurement of the content in O2, CO and CO2, efficiency of the

combustion, air excess and CO/CO2 ratio.

Two solenoid valves, one for each working flow: gas or fuel oil.

Flame detection sensor and ignition controller.

Safety measures. The feeding to the burner is cut off when:

 The outlet water temperature exceeds 80ºC.

 The pressure of the cooling jacket exceeds 1 bar.

 A water flow higher than 5 l/min is not detected.

The complete unit includes as well:

COMPLETE TECHNICAL SPECIFICATIONS (for main items)

With this unit there are several options and possibilities:

 - Main items: 1, 2, 3, 4, 5 and 6.

 - Optional items: 7, 8, 9 and 10.

Let us describe first the main items (1 to 6): 1

Advanced Real-Time SCADA.

Open Control + Multicontrol + Real-Time Control.

Specialized EDIBON Control Software based on LabVIEW.

National Instruments Data Acquisition board (250 KS/s, kilo samples per second).

Calibration exercises, which are included, teach the user how to calibrate a sensor and the importance of checking the accuracy of the sensors before taking measurements.

Projector and/or electronic whiteboard compatibility allows the unit to be explained and demonstrated to an entire class at one time.

Capable of doing applied research, real industrial simulation, training courses, etc.

Remote operation and control by the user and remote control for EDIBON technical support, are always included.

Totally safe, utilizing 4 safety systems (Mechanical, Electrical, Electronic & Software).

Designed and manufactured under several quality standards.

Optional ICAI software to create, edit and carry out practical exercises, tests, exams, calculations, etc. Apart from monitoring user's knowledge and progress reached.

This unit has been designed for future expansion and integration. A common expansion is the EDIBON Scada-Net (ESN) System which enables multiple students to simultaneously operate many units in a network.

CAPTCHA ImageRefresh Image

Imaginile prezentate au caracter informativ şi uneori pot conţine unele inadvertenţe.